Halkali merkez neighborhood fatih st ozgur apt no 46 , Kucukcekmece , Istanbul , 34303 , TR
During the night of 15–16 August 2026, a portion of TV and radio services on Türksat 3A was moved to newer Türksat satellites at the same 42° East orbital position. TKGS-compatible equipment can normally update the channel list automatically; older or non-updated TVs and receivers may need a network scan. This hub routes you by brand, TV platform and symptom.
Make three selections and get a starting diagnosis.
Western coverage reference; enable Network/NIT scan when updating the full list.
Eastern coverage reference; use it as a second diagnostic point if quality is absent on the first.
These are key network references used for the 16 August 2026 transition. For channel-specific current values, check Türksat’s Frequency List.
Türksat announced that the migration would take place overnight on 15–16 August 2026 and that services would move to newer satellites at the same orbital position. That detail matters: channels disappearing after the migration is not, by itself, a reason to repoint a normally working dish.
Separate a channel-list issue from a physical reception failure. If some Türksat services still work, start with TKGS or network tuning. If every service reports No Signal, also inspect the coax, LNB, DiSEqC and communal distribution.
Social posts often present 12380 MHz Vertical 27500 as the single fix. The other key network reference is 12423 MHz Horizontal 30000; both use FEC 3/4. Enable Network Search/NIT when refreshing the full list.
The pair is also useful diagnostically. If one locks and the other does not, you have information about the reception path. If neither produces quality, investigate the RF chain rather than entering random frequencies.
Türksat Channel Update System is designed to carry channel and frequency changes to compatible receivers. On a supported TV or set-top box, try the automatic update path before wiping personal settings with a full reinstall.
No TKGS option does not automatically mean a fault. The model may not support it or the manufacturer may expose it elsewhere. Standard DVB-S/S2 auto tuning with Network Search can rebuild the list.
Many TVs show two meters. Level can simply indicate RF energy at the tuner input; quality indicates a valid lock on the selected transponder. A TV can show very high level and still find zero channels when quality is zero.
Compare quality on 12380 and 12423. Universal LNBs commonly use 9750/10600 with 22 kHz Auto. DiSEqC mapping in communal systems is installation-specific; “Türksat is always 1/4” is not a universal rule.
Manufacturers use the same satellite standards through Tizen, webOS, Android TV, Google TV and proprietary interfaces, but menu structure differs. Even within one brand, a 2018 model and a 2025/2026 model can place satellite tuning under different headings.
The brand guides in this package avoid pretending that one menu fits every model. Manufacturer-specific facts are marked, and when necessary the model number should be matched with the official manual.
First define the scope: all channels gone, only a few missing, or scan returns zero? Then compare quality on 12380 V 27500 and 12423 H 30000. With quality present, continue on the channel-list side; with no quality, move to the RF path.
Only horizontal or only vertical services missing is a strong clue for 13/18 V polarization switching, connectors, LNB or multiswitch. For one missing service, scan its current transponder instead of deleting the entire list.
Factory reset can remove Wi-Fi, picture, app and personal channel settings, while it cannot repair a bad cable or wrong DiSEqC port. Complete TKGS, both network references, Network Search and signal-quality checks first.
Some manufacturers require a reset for specific model/TKGS initial setup procedures. Use it only when the official instructions for the exact model explicitly call for it.
Switch source to Satellite or Live TV.
Confirm Türksat 42°E.
Check TKGS update if supported.
Check quality on 12380 MHz V 27500 FEC 3/4.
Compare quality on 12423 MHz H 30000 FEC 3/4.
Run Network/NIT scan on a reference with quality.
If neither locks, inspect 9750/10600, 22 kHz Auto, LNB power and DiSEqC.
On communal systems, cross-check with a known-working outlet/setup.
For only a few missing services, manually scan the current transponder from Türksat’s frequency list.
A portion of services was moved from Türksat 3A to newer satellites at the same 42°E slot, so some receiver lists may need updating.
No. The orbital position remains the same, so normal installations continue to use the existing dish.
Both are key network references: 12380 V 27500 and 12423 H 30000, FEC 3/4.
Yes for a full list refresh; it can be disabled for a single targeted transponder.
It is designed to update compatible channel lists, provided adequate satellite reception exists.
Basic TKGS update information is carried via satellite, not dependent on Internet for its core function.
Level without quality can indicate wrong satellite/transponder, DiSEqC, LNB or cabling.
Common low/high local oscillator values for a Universal Ku-band LNB; specialised systems can differ.
It depends on the installation. A single dish may use Off; a communal system can map any port.
Usually not first. Complete tuning and signal diagnosis; reset only when the exact model procedure requires it.
Use the current Türksat frequency list and manually scan that channel’s transponder.
In the external receiver’s setup menu, not the TV tuner.
Turkey (Turkish)
Germany (German)
Worldwide (English)
